Features of Racks:

One thread tolerance ± 20 μm,
The overall (total) thread tolerance at 500mm is ± 30 μm.
The standard quality of rack and pinion gears is 8 and 9,
It complies with the DIN 3962/63/67 norm.
Our racks are manufactured as straight teeth and their pressure angle is 20 º.
Our racks are made of CK 45 material.

Rack and Rack Gears

Mod.	Passo / Pitch Teilung / Pas Paso	S	hp	hex S	1000			2000			3000
					Z	L	Kg	Z	L	Kg	Z	L	Kg
1	3.1416	0.5	14	15x15	319	1002.17	1.5	637	2001.2	3.1	955	3000.23	4.9
1.5	4.7124	0.6	15.5	17x17	213	1003.74	2	425	2002.77	4	637	3001.8	6.1
2	6.2832	0.6	18	20x20	160	1005.31	2.7	319	2004.34	5.4	478	3003.37	8.4
2.5	7.854	0.7	22.5	25x25	128	1005.31	4.3	255	2002.77	8.6	382	3000.23	11.9
3	9.4248	0.8	27	30x30	107	1008.45	6.3	213	2007.48	12.5	319	3006.51	18.6
4	12.5664	0.8	36	40x40	80	1005.31	11.1	160	2010.62	22	239	3003.37	31.3
5	15.708	1	45	50x50	64	1005.31	17.5	128	2010.62	34.6	191	3000.23	45.3